Binned painting sells for R55K

A painting of The Bluff, Durban by the celebrated Cape artist Ruth Prowse found in a refuse bin in a Karoo town, sold last night for R55 700 at Strauss & Co's Cape Town auction. This painting formed part of the Evening Sale comprising 102 paintings with several lots selling in the millions.

Highlights included Irma Stern's Malay Girl, which realised R11 697 000, followed by the relatively unknown Wolf Kibel's Houses with Red Roofs, which went through the proverbial roof by more than doubling his previous auction record also set by Strauss & Co in October 2009. Anton van Wouw's impeccable cast of a Miner with Hand Drill and Maggie Laubser's Portrait of a Girl with Geese, both of which fared equally well each achieving over R2 million. The more contemporary Walter Battiss Figures in a Landscape was similarly successful and achieved R1 949 500.

Kanchandas Gupta’s Strides Of Dignity is an eclectic narrative that brings together his impressions of art and artistes; all in a manner that juxtaposes the real with the surreal. This solo show features over two dozen paintings of the Kolkata-based artist. The introduction to his work at the gallery reads, ‘Kanchandas Gupta is known for his skill as a figurative painter and whose works capture the essence of human drama. The two dimensional pictorial format that he works in brims with emotions and dramatism through his use of intensely emotive colours and epic charm.’

And indeed, this dramatism is seen most in the central piece of the exhibit A Performer With Another Face. Standing tall at 72 inches, acrylic in canvas, it portrays a joker with a mask in his hand and another one painted on to his face, almost as if one is meant to ponder over the masks artistes have to wear to entertain, and when does it come off, and if it does at all...

The paintings on display are his take on people and places,Find the best selection of high-quality collectible bobbleheads available anywhere. as well as the pursuit of success and work. Conflicting images such as a pigeon perched atop a gun and two Untitled paintings with one depicting a fertile, picturesque landscape, and the other a rundown shanty placed right next to each other, all add to the inherent drama that his art reflects. A prominent series in the exhibit titled Random Thoughts Parallel Autopsy featuring about a dozen paintings brims with layers of elements, quite literally as the paintings are often an amalgamation of many smaller works woven together, each one bringing in a new perspective to the larger picture.

This notice was part of an announcement that the eruv in the Five Towns area would be "down" for the Jewish Sabbath. Though peculiar (can't carry a book more than six feet?), this notice relates to one of the most important aspects of Judaism: resting on the Sabbath. An eruv is a conceptual and physical enclosure around a Jewish community that allows its members to accomplish certain activities that Jewish law otherwise restricts on the Sabbath.

Yeshiva University Museum is currently presenting an exhibition, "It's a Thin Line," which I curated, on the eruv -- a topic that continues to amaze and confound our visitors, and, not least of all, me. Though the concept manifests in nearly invisible structures surrounding our neighborhoods and us, the exhibition's artifacts illustrate how much this topic affects Jewish life.

Included in the show are dozens of printed books and manuscripts; photographs of Jewish life in 19th- and 20th-century New York; railroad maps, postcards and schematics; confidential rabbinic debates and decrees; flyers both extolling and decrying those who establish eruvs in Brooklyn; films on the political and communal dimensions of eruvs across the tri-state area; and contemporary art works exploring the concept of eruv and its implementation in New York.

These objects and issues were the focus of a day-long symposium at Yeshiva University Museum this past October. The next day, Hurricane Sandy shuttered the museum for over two weeks, perhaps ironically leaving a slew of damaged eruvs in its wake.

Indeed, Hurricane Sandy disrupted many of our lives. For most of us, the storm was an inconvenience. For the Jewish communities who use the eruv, it was something else. Surely the absence of an eruv was a nuisance, one that abated in many communities within a few weeks following Sandy, though sometimes with small, temporary boundaries. In other places, the eruv will be down for months.

Some community leaders are taking this situation as an opportunity to remind themselves what life is like without an eruv. Others, however, are concerned about whether or not a generation of Orthodox Jews who have been brought up carrying on the Sabbath thanks to an eruv will remember to avoid carrying -- and thereby keep the Sabbath holy.

Of the varied forms of work that observant Jews avoid on the Sabbath, one of the most basic is carrying. Jewish law prohibits carrying any object outside of a private area to an open or public space. In other words, you can carry a glass of water around your living room, but not out of the front door.

This law poses obstacles to the fundamental ways we operate in the world, prohibiting the carrying of house keys,Like most of you, I'd seen the broken buy mosaic decorated pieces. a cane or medication, or even an infant.Service Report a problem with a street light. Jews have developed ways around the law, such as belts and jewelry that incorporate keys. However, for many elderly and sick people, and especially for women and children,Laser engravers and laser engraving machine systems and supplies to start your own lasering cutting engraving marking etching business. the proscription of carrying on the Sabbath symbolizes a virtual house arrest for 25 hours a week.Site describes services including Plastic Mould.

Rabbinic Judaism developed a solution about 1,800 years ago. Drawing from passages in Jeremiah and other parts of the Bible, Jewish sages in Roman Palestine came up with a the concept of an eruv, a symbolic border resembling a series of doorways (two uprights connected by a crossbeam), which mixes or fuses private spaces into one shared space by enclosing a neighborhood or a city.

Top 5 Nostalgic Nights

What does midnight look like in the Paris of South America? For those of us cursed with a golden-age mentality, Buenos Aires can be a reprieve from all the baggage that comes with modern reality.

This city is captivated by nostalgia, and even if a venue wasn’t born decades ago, many owners pay close attention to details in the hope of capturing a little of the magic of bygone eras. The bar at the Sofitel hotel transports customers to Montmarte with themed evenings every Thursday, whilst Sunday strolls in San Telmo’s markets act as a gateway to the past.

But once all of yesteryear’s magic gets into your system, where does one go when the lights go down? And just where, prey tell, do you plan to wear that poodle skirt?

From the city’s shadowy jazz bars to sultry milonga halls to lively penas folkloricas,Find Custom designed glass mosaic. this week’s Top 5 brings you our pick of places to live out your dream era.

Legend has it that the 80s stunted the growth of Club 74. Born in 1958, the club progressed with the ages until deciding to remain in a disco time capsule a few decades ago.First Impressions sells silicone molds. The white stucco walls match the white stucco couches, giving the whole place an igloo-like feel.

The Saturday night fever is still burning every weekend, with a DJ who pretends he’s never heard of Lady Gaga. A surprisingly mixed crowd boogies on the dance floor – some dancing to remember,Capture the look and feel of real stone or China ceramic tile flooring with Alterna by Armstrong. and some channeling moves they’ve surely only seen on TV.

The club has a celebratory atmosphere – there are usually several birthday parties going on – and it’s a refreshing escape from the moody indie-rock scene of today.

Saturday is definitely the night to go, as it’s the only night of the week when the dance-floor lights up, in true retro fashion like a flashing Rubix cube. And really, what good are revolving mirror balls without the neon lights?

There’s more than one way to swing in Buenos Aires, and if you choose the kind on offer at San Nicolas’s quirky Teatro Mandril, cameras are even allowed.

A little alcohol helps to loosen up limbs as the crowd make eyes at each other around a dimly-lit, college fundraiser-style bar.Shop for oil painting and oil paintings for sale included:abstract oil paintings. Every brand of hipster seems to be gathered there on a Friday night; the retro hipster, the punk hipster, the popular girl-turned hipster, even the odd Dad hipster.

Around midnight everyone starts to gather in the back room, near the stage and dance floor. Drinks are abandoned and tables shuffled against walls to allow for the gyrations of 200 or so guests.

Guys and girls are split and line up facing each other as a male and female instructor teach the sexes their corresponding steps. After a few minutes of learning basic steps the couples grab a partner and the room transforms into a fire inspector’s nightmare. Patrons spill into every spare corner and the dance floor becomes a mere suggestion of where you should be. After about 10 minutes of practice, the sea of men and women splits again to learn more complex moves.The indoor Tracking is based on Bluetooth technology.

Mild winter left Mercer County towns with piles of salt and cash

The fourth warmest winter on record dumped very little snow on New Jersey, but towns enjoyed a windfall as funds for snow removal and stockpiled salt went largely unused.

Without snow and ice to create havok, residents also benefited greatly, according to the state's largest insurer, New Jersey Manufacturers Insurance Co., which reported that damage claims by both homeowners and drivers declined significantly. Sales of natural gas for heating also fell, according to the utility PSE&G.

Hamilton spent $36,363 on snow removal for the 2011-2012 season, just 3 percent of what was spent in the previous budget year, according to figures from budget officer Roberta O. Magdziak and business administrator John Ricci.

"Last year, 2010 into 2011, we spent about $1.2 million,Can't afford a third party merchant account right now? and we had spent roughly the same amount the year before," Ricci said. "The year before that it was down around $300,000,Here's a complete list of oil painting supplies for the beginning oil painter." but nowhere near as low as this year, he said.

For the 2012 calendar year beginning Jan. 1, Hamilton had earmarked about $460,000 for snow expenses, he said. While that number is less than half what the township spent in each of the last two years, "We were assuming for budget purposes that we couldn't possibly get three bad winter seasons in a row. Some of that money has already been used for stockpiling salt, Ricci said. "Other than that, there's been almost nothing spent."

Ewing spent just $10,000 on snow removal during the last half of 2011, saving $55,000. The township has saved that money and augmented it with $5,000 more to cover 2012 snow expenses.

"Realistically, two years ago that would not have been enough,Wireless Indoor Positioning System have become very popular in the system. but you've got to guess and then do an emergency appropriation based on what Mother Nature does," Ewing business administrator Jim McManimon said.

"In Trenton, workers spread roughly 481 tons of rock salt of the city's 780-ton supply this winter, at a cost of about $93,Mold is a plastic molds and plastic injection mold manufacturer in china.000,Dimensional Mailing magic cube for Promotional Advertising, which saved the city close to $77,000," city spokesman Lauren Ira said. The year before the city spent $313,151 on related expenses, she said.

Mayor Janice Mironov said East Windsor Township used 465 tons of salt valued at $25,518 over the 2011-2012 winter season. That amounts to about a fifth of the township's current stash of more than 2,400 tons of salt, which suggests the township was prepared for a much greater snow deluge.

Including the costs related to the "Snowtober" snow storm, Lawrence reported using a little more than $68,000 in funds for snow removal this winter, leaving the township with $78,000 in trust and all of the $88,000 budgeted for 2012, Richard Krawczun said.

Expenditures by the county government shrank more than 75 percent, from roughly $800,000 spent in the 2010-11 season to just under $185,000 this winter, according to figures from spokeswoman Julie Willmot.

The county does not budget directly for snow removal services, but appropriates funds according to weather.

"Mercer County is responsible for 425 lane miles, and we'll always be in the never-ending battle of pothole and bridge repairs, but this mild winter has given all of us a break," she said. "Hopefully this cold snap represents winter's last gasp."

'Bumspiel' to raise awareness of colorectal cancer

When most people survive cancer, they just want to put the disease and its gruelling treatment behind them.

Not Surrey's Deb Imada.

That's because her cancer was in her behind. And now she's made it her mission to put colorectal cancer in the forefront of people's minds.

She's doing that by organizing the second annual Bumspiel for Colorectal Cancer, to be held at the Royal City Curling Club in New Westminster on Saturday (March 31).

The event is a fundraiser for the Colorectal Cancer Association of Canada. But more importantly, Imada hopes it will raise awareness about the disease and how to survive it.

Colorectal cancer is the second leading cause of death from cancer in Canadian men and women combined. Of the approximately 22,000 Canadians diagnosed with colorectal cancer last year, 8,900 will die from it. Those are grim numbers considering the disease is curable 90 per cent of the time – ifOur team of consultants are skilled in project management and delivery of large scale rtls projects. it's caught early.

It's that last part that hangs most people up, says Imada. It's not easy to talk about your backside, and "people are so fearful about getting a colonoscopy."

In fact, cancer was the furthest thing from Imada's mind when she went to her doctor to get checked out for a possible recurrence of the hemorrhoids that had plagued her after her son was born four years earlier. Her family had no history of colorectal cancer, she'd never had a problem with benign polyps, she was active, and she was only 43 years old - seven years younger than the primary risk group.

But when her doctor said she felt a lump during her examination, Imada's world turned upside down.

Four months of tests, two surgeons and five days of radiation treatment later, the tumour was removed.

"The waiting is the hardest part," says Imada. "The whole time I felt like a ticking time bomb."

But her battle didn't end there. Six months of chemotherapy stretched to eight. She suffered numerous side effects, including painful numbness in her fingers and the bottoms of her feet. She says there were days she was so physically, mentally and emotionally exhausted, she couldn't get out of bed.

Regular screenings to ensure she remained clear of cancer are emotionally agonizing.

"It's like the doctors say, 'we've cured you but the chances of recurrence are highest in the first two years',Here's a complete list of oil painting supplies for the beginning oil painter." she says.

Every colonoscopy or CT scan, she hopes and prays for a clean report. She'll continue to be screened for the rest of her life. It's like a fellow patient once told her, "We're out of the woods, but we're not yet out of the forest."

During her battle with colorectal cancer, a colleague at work was also diagnosed with the disease and eventually died from it. That's when she made a promise to him,Factory direct stone mosaic featuring marble mosaic floors. and to herself, to help spread the word about the disease and the importance of early detection through regular screening.Listing of Taiwan & China Plastic Mould manufacturer & suppliers.

"It makes me mad when someone dies from this because it's so curable," Imada says.

A recreational curler at the Royal City Curling Club before she was diagnosed, Imada came up with the idea of a "bumspiel" because her son had shown interest in the sport while watching the Vancouver Winter Olympics.MDC Mould specialized of Injection moulds,

The clever play on words helped as well, she says.

It's a non-competitive event that Imada promises will be just as much fun for beginners as hardcore stonethrowers. It's even attracted a team of four doctors from the Netherlands who specialize in colorectal cancer and found out about the bumspiel while searching the Internet. There will be door prizes as well as an award for the top fundraiser.

Elegant home, fun modern design

A modern home was not in their original plan when she and husband Ray moved to Cayucos from Los Banos, where they had had lived in a Spanish-style home for 35 years. Their real estate agent discovered two and a half empty lots on a steep slope overlooking the ocean. Home plans were already approved, but the house was never built because of the owner’s death.

“We saw the view and within an hour wrote out a check for the lots and plans,” said Clara.

They met with San Luis Obispo architect Thom Brajkovich of Paragon Designs who had drawn up the plans for an approximately 3,400-square-foot, two-story modern beach house.

“After deciding to start over with a more traditional style, we started poring over many architectural magazines and really loved the look of the clean lines,” said Clara.

They worked with Brajkovich to modify designs to better reflect their tastes. The revised plans included enlarged windows in rooms where views are the most spectacular, yet none on the north and south sides, where neighbors’ houses are the only spectacle. This also provided more space for the couple to display their collection of artwork, which includes portraits of their children by well-known portrait artist Joan Bengtson and copper wall art with a striking verdigris design by local artist Michael Ackerman, which was purchased specifically for the house.

The couple was accustomed to an oversize master bedroom in their previous home. In their new home, they wanted their bedroom to be on the same floor as the living room and kitchen. They enlarged the modest bedroom planned for that level by moving the closet 18 inches and bumping out one exterior wall 4 feet. To make the room feel even more capacious, they opted for larger windows, a deck, and a built-in dresser that makes use of a narrow space near the door.

With plans for the home in place, Clara began selecting furniture and finish materials as her “fun” take on modern began to coalesce. Her look encompasses sleek silhouettes, geometric lines, and spaces that are both uncluttered and functional. In areas where the view is the focal point, she kept colors fairly neutral and instead used a playful mix of textures.

“The floor was intended to disappear, so the eyes go to the view,” she said of the tile floors,Handmade oil paintings for sale at museum quality, which look like stone. Cool materials such as mirrors, large expanses of glass, and stainless steel, which was used for handrails and the front door, are balanced with warmer,The Transaction Group offers the best high risk merchant account services, more textural materials like maple woodwork, pat- terned area rugs, fabric shades and faux fur throws.

They purchased furnishings and lighting for the home in a contemporary style, with a few art deco and Asian-inspired pieces mixed in.InLocality specializes in indoor Tracking Technologies. One of their more notable pieces is a Herman Miller three-point landing coffee table engraved by famed sculptor Isamu Noguchi, which sits in the living area. One of Ray’s favorite furnishings is the dining room table from Habitat in San Luis Obispo. It was cut from a single cross-section of a teak tree and retains its natural shape, including splits in the wood.

The custom kitchen, designed and created by San Luis Kitchen Company, was laid out to feature the view and flow easily into the dining and living room areas. They eliminated the range hood to avoid blocking sightlines into the living room. Instead, they used a down-draft system. The refrigerator and all tall cabinets were kept on one wall in order to accommodate three large windows.

They chose flat, light maple cabinets that are frameless to present a streamlined look. To break up the seamless expanse of cabinetry, they added in a few stainless steel fronted cabinets that coordinate with appliances.

Throughout the house,An Air purifier is a device which removes contaminants from the air. Clara added in color with restraint. She was particularly drawn to iridescent materials that bring to mind the pearly insides of seashells. This includes glass tile accents in the bathrooms and kitchen. Capiz shells adorn panels outside the front entrance, as well as aframed mirror in a guest bathroom.

The couple incorporated many practical features to fit their lifestyle. They have a large media room that doubles as a home gym. They have two completely separate bathrooms. Clara’s is colorful and whimsical with handblown Murano glass vessel sinks and blue glass tiles. Ray’s is a “manly bath” with a fossilized granite countertop and a bronze vessel sink. Other features include a backyard putting green, an elevator, and a specialized sink in the laundry room for when the hairstylist makes a house call.

The house needed to be low-maintenance, especially with two cats that prowl its every corner. Clara discovered the variety of low-maintenance tiles that convincingly stand in for more highmaintenance materials. In master bathrooms and on the fireplace,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. she selected Italian ceramic tile that looks like burnished metal. The floor tiles that look like stone were cut into 6-inch pieces and used in place of standard wood baseboards. The look is cleaner and, unlike wood baseboards, they resist dings and scratches.

Got a cold sore? Don't kiss baby!

Fever blisters - also called cold sores - are fairly common, but they have nothing to do with a cold.

These sores typically appear on the outside of the mouth, on the lips. The majority (about 95 per cent) of fever blisters are due to a virus, typically herpes type 1. Because the sores are due to a virus,Get information on Air purifier from the unbiased, they're contagious and most people will be exposed to the virus during their lifetime.Handmade oil paintings for sale at museum quality,

Children are typically exposed via contact with an adult, sibling or relative who has a fever blister, or with other children who've mouthed toys or other objects that may have been contaminated with the virus.

In many cases, exposure is asymptomatic, while other children will develop painful vesicles appearing both inside the mouth, on the tongue and gums, as well as on the lips 3-5 days after exposure.

This initial illness is called herpetic gingi-vostomatitis. The initial infection tends to be more uncomfortable and may take up to two weeks to resolve. The most difficult aspect is oral discomfort, so it's important to make sure infected youngsters stay hydrated. Popsicles are often helpful for this.

Once you've been exposed to the herpes virus, it remains in your nerve endings,Shop at Lowe's for garage Ceramic tile, where it may be dormant and asymptomatic for years.Full-service custom manufacturer of precision plastic injection mold, About 60 per cent of children are positive for HSV-1 by adolescence. At times of stress, sun exposure, fever, or menstrual periods, the virus may become active again, and result in a fever blister.

Children who develop a fever blister are also contagious and may spread the virus to others by touching them, or picking at the lesion and then touching Omega Plastics are leading plastic injection moulding and injection mould tooling specialists.other people or objects with their mouths.

Fever blisters may be treated in most cases with a topical antiviral applied directly to the lesion. Prescription medications are available that may shorten the duration of a fever blister by a day or two, especially if started early and applied frequently. If you child experiences recurrent core sores, speak with your pediatrician about the use of oral antiviral medications.

Remember, if you have a fever blister, don't kiss your baby! Although the most viral shedding occurs after the initial HSV infection, you remain contagious with each fever blister, so it is best to take precautions for a few days after an outbreak.

PN award finalists shine

A team of judges from PN’s editorial staff selected the finalists, with help from P&M Corporate Finance LLC of Southfield, Mich. The winner will be announced Jan. 31 at the Plastics News Executive Forum in Tampa, Fla.

The judges evaluated all candidates on seven criteria: financial performance, quality, customer relations, employee relations, environmental performance, industry/public service and technological innovation. Last year’s Processor of the Year was Plastikos Inc., a molder of electrical connectors and medical parts in Erie, Pa. Steinwall also was a finalist last year.

Senior reporter Bill Bregar, who coordinates the Processor of the Year Award, recently visited all three finalists. Here is a look at those firms, in alphabetical order.

Bemis, in Sheboygan Falls, Wis., has earned a reputation as a pioneering technological leader — especially in coinjection molding and its use of six-axis robots. And your head certainly does spin after a plant tour: On nearly all presses, a large, articulating-arm ABB robot removes parts from molds and does finishing operations such as degating, trimming and sanding. In many cases, that robot passes the part on to another six-axis robot for assembly right at the press, or part stacking.

The company is known for large parts. Running a massive, 6,600-ton Milacron will generate that kind of attention: What is believed to be the world’s largest coinjection molding press turns out hoods for John Deere farm tractors and other big parts. Molds rotate on two-shot presses outfitted with two barrels — or even three barrels, in what Bemis calls “tri-injection.” CEO and owner Peter Bemis, who was inducted into the Plastics Hall of Fame in 2006 and holds several patents, is always willing to check out a new technology, and often spends the money to try it out.

Markets include agricultural equipment, medical, telecommunications, appliances, office furniture and shopping carts.Take a walk on the natural side with stunning and luxurious Floor tiles from The Tile Shop.

Bemis Manufacturing runs about 140 injection molding machines and 20 extrusion lines. A loyal customer of Milacron LLC, Bemis has helped Milacron design special injection molding equipment.

Bemis Manufacturing was nominated by Glenn Anderson, Milacron’s senior vice president of global and strategic accounts.

Bemis employs 1,800 people in plants in Sheboygan Falls; Lenoir, N.C.; Monterrey, Mexico; Burnley England; Turin, Italy; and Wujiang, China.

Peter Bemis is the latest in a line of family executives that began in 1901,Alfa plast mould is Plastic moulds Manufacturer and plastics Mould Exporters in India since 1992, when the company started out as a manufacturer of wooden toy wagons. The company also made wicker-style patio furniture from woven paper. But sales dried up during the Great Depression. The salvation? Molded wood toilet seats. Bemis launched an all-plastic injection molded toilet seat in the 1960s.

Today, Bemis Manufacturing claims to be the world’s largest maker of toilet seats, both wood and plastic. The company has rebounded sharply since the recession,The magic cube is an ultra-portable, with double-digit sales increases in 2010 and 2011, when sales totaled $340 million — about $220 million of that from plastic molding and another $20 million from profile and tubing extrusion.Husky Injection Mold Systems designs and manufactures a broad range of Executives said toilet seat sales have remained flat and almost all of the growth has come from its Advanced Technology Group.

Bemis has been consistently profitable and has no debt.

Technology is an obvious strong point. The Plastics News judges also gave Bemis high marks for employee relations, thanks to very low turnover and some progressive policies. Under a program called “Book It,” small teams of employees are authorized to spend up to $6,000 to implement a continuous-improvement project. At Bemis, all shop-floor employees can try for a so-called “term position,” where they work in a management job for three years.

The company’s unionized workforce in Sheboygan Falls supports these policies, as well as the extensive use of automation, according to Bemis.

The judges also praised Bemis for its environmental performance. Coinjection molding can, effectively, “bury” millions of pounds of recycled or off-spec resins inside a part, as a core layer covered by virgin resin. Bemis’ energy-conservation projects have cut electricity use by 11.5 million kilowatt-hours since 2001 by, among other things, replacing lighting, installing an enclosed water-control system, establishing a settling pond to collect all rainwater and using Web-enabled software to meter energy consumption.

A vocal industry advocate, Peter Bemis has served on the board of directors of the Society of the Plastics Industry Inc., both nationally and for the SPI Midwest region.

The company is active in historic Sheboygan Falls, supporting a revitalization effort downtown, where it runs the Bemis Bath Shoppe.The EZ Breathe home Ventilation system is maintenance free, Bemis also opened up land for walking and bike paths.

Bemis scored high on customer relations, thanks to its long-standing relationships with leading customers such as Deere & Co., Briggs & Stratton Corp., Haworth Inc. and Whirlpool Corp. Working closely with industrial designers, Bemis won many awards for its molded parts from the SPI’s Alliance of Plastics Processors, formerly known as the Structural Plastics Division.

Sotheby's New York to sell 'The Rockefeller Raza' during Asia Week sales in March

NEW YORK, N.Y.- Among the highlights of Sotheby’s March 2012 Asia Week sales in New York is one of the most significant paintings by Sayed Haider Raza ever to appear on the market - Village With Church from 1958. The painting was purchased by Mr. and Mrs. John D. Rockefeller III from the landmark 1958-59 exhibition Trends in Contemporary Painting In India and remained in their historic collection until 1994. Village With Church represents the apex of Raza’s early period and is estimated to sell for $1.5/2.5 million. The painting will be included in Sotheby’s sale of Modern and Contemporary South Asian Art on 19 March 2012 and will be on view beginning 16 March.

Priyanka Mathew, Head of the Modern and Contemporary South Asian Art Sale at Sotheby’s said: “We are delighted to bring this important and historic painting to auction. John D. and Blanchette Rockefeller were two of the most important early champions of modern Indian painting in the United States. Their patronage and support was key in introducing the work of the Progressive Artists’ Group in America, of which Village With Church is such a significant example.”

John D.Alfa plast mould is Plastic moulds Manufacturer and plastics Mould Exporters in India since 1992, Rockefeller III, the eldest son of John D.As a professional manufacturer of China ceramic tile, Rockefeller Jr., devoted his life to the promotion of Asian-American relations. Along with his wife he made several visits to India, meeting numerous artists, businessmen and politicians, including Prime Minister Jawaharlal Nehru and his daughter Indira Gandhi.

Perhaps his most notable achievement was the establishment of the Asia Society in New York - an organization that continues today with the goal of bringing ‘the peoples of the United States and Asia closer together in their knowledge of each other and each other’s way of life.’ Central to this mission was promoting cultural exchange and addressing the lack of exhibitions of Asian art in the US.

In addition to the Asia Society, John D. Rockefeller III founded both the Indian Cooperative Union and the American Association for Economic and Social Development, for which Thomas Keehn was the representative of the Rockefeller Foundation. Keehn lived in India and befriended many of the artists who became known as the Progressive Artists’ Group. He went on to organize 8 Painters, an exhibition of their work held in Delhi in 1956 that included Village With Church. This exhibition would later expand and transfer to the U.S.The magic cube is an ultra-portable, as Trends In Contemporary Painting In India, the first such exhibition ever mounted in America. It was shown in numerous museums and galleries throughout the U.S. and was received as both a critical and popular success. Among the stops was a show at Graham Gallery in New York where the painting caught the eye of the Rockefellers.

Raza spent a considerable portion of his career in France, first arriving in 1950 and still today maintaining a studio in the south of France. He was deeply moved by the works of the European modernist masters, particularly CEzanne and van Gogh, and his works from this period echo the structure and formalism of both of these artists.Husky Injection Mold Systems designs and manufactures a broad range of The Transaction Group offers the best high risk merchant account services, Receipt of the prestigious Prix de la Critique (Critic's award) in 1956 afforded Raza both international recognition and the freedom to leave Paris and travel throughout his beloved adopted homeland. Throughout the 1950s in France, Raza painted the landscapes of Europe in semi-abstracted forms, but with identifiable architectural elements that provide a constant link to human activity. Heavy with impasto and punctuated with staccato gestural strokes, Village with Church exudes a dynamic, tempestuous energy so characteristic of the artist; a hybrid of the lyrical abstraction redolent of the postwar Ecole de Paris, and the vibrancy and direct color treatment of a Rajput miniature. Village With Church is one of the seminal paintings from this period and stands as an enduring legacy of one of the pioneers of Indian Modern Art.

Striving for, and defending, originality

The process of generating new scientific ideas can be difficult. Persuading other people that the ideas are novel and valuable is even harder. Where do we start?

Rather like art, new science must contain some mark of originality,The magic cube is an ultra-portable, but it also needs close connections with previous work if it is to find an audience. Of course being too original is a common problem only for geniuses: Van Gogh sold just one painting in his lifetime. Tickets to Schoenberg's premieres sold better - but mainly to protestors who liked to whistle through his performances. Physicist Hugh Everett struggled to sell his "many worlds" interpretation of quantum mechanics to anyone.

For the rest of us, the challenge is reversed: how can we be sufficiently novel? One approach is to combine many old thoughts in a new melting pot. With patience, it's then possible to be reasonably systematic about allowing new ideas to form.

The process is not always that methodical, though. Take one of my recent ideas - I was sitting in a conference in February and it just popped into my head more-or-less fully-formed. (That is, of course, a description of the subjective experience rather than a neurological analysis. The idea itself, as will become clear,Full-service custom manufacturer of precision plastic injection mold, was subconsciously triggered by previously accumulated knowledge. Rather like how J K Rowling says that the Harry Potter story came to her in a flash of inspiration, but she surely wouldn't deny its debt to earlier literature).

The idea,The Transaction Group offers the best high risk merchant account services, roughly speaking, was this. Let a marble roll around freely on a concave rubber sheet. Assuming no energy is lost to friction, the ball will keep moving around forever, the exact motion dependent on the contours of the sheet and the initial position of the ball.The EZ Breathe home Ventilation system is maintenance free, Now suddenly stretch the sheet, wait a while, then release back to its original shape. Is the marble's final motion equivalent to its initial motion? Or is it now on a different path?

The answer is that it's on a different path, a path that I could calculate mathematically. It turns out this kind of calculation can show how supernova explosions change the orbits of dark matter particles within galaxies. I tested the idea against detailed computer modeling of galaxy formation and, over a couple of months, wrote a paper showing that such a simple model can accurately explain some recent developments in state-of-the-art supernova simulations.

The reaction from the astrophysics community has been sharply divided. There are people - happily the majority - who are enthusiastic about the new calculations. The paper's initial citation rate has been higher than any paper I've written previously. But there is a small group who think that it's nothing new.

When I announced the result at a conference, one famous astrophysicist was heard to whisper loudly to his friend: "have we just travelled back to the 90s?" It's a favoured method to shoot down a young researcher: assert their calculation merely restates some earlier result, preferably a result that the gunner himself discovered.

Scientists are used to coming up with an idea only to find it's already known and understood. The internet makes it relatively easy to track down relevant prior publications and so abandon ideas that are adequately explained elsewhere. I had done this search and decided that my results were new, so was taken aback by the strength of the minority negative reaction. Things got worse when the referee, a scientist tasked with checking the paper for the journal, sided with the "not-new" camp. I had a few sleepless nights wondering whether I'd committed one of the original scientific sins: rebranding an old idea as my own.

But after re-reading the old articles I have concluded that I am innocent. Luckily a referee for a different journal agreed that the mathematical technique adds to our understanding.MDC Mould specialized of Injection moulds, Yes, similar effects have been seen before, but my paper already explicitly refers to a vast number of previous studies. I now plan to update it with a clearer discussion in light of the more constructive complaints. In the end, though, the new approach really does allow for unprecedented precision in describing how explosive events are capable of changing the properties of dark matter.

Even if it weren't such a tangible step forward, what would have been wrong with publishing a new way to calculate an old result? Would that have been a creative failure? I've given up troubling over it. As Stephen Sondheim's musical Sunday in the Park with George suggests: "Stop worrsying if your vision is new; let others make that decision, they usually do! You keep moving on."

Can Windows Phone make mobile a three-horse race?

Long ridiculed as the tech industry dullard, Microsoft actually has a hit, at least with the technorati.

It is the mobile phone software called Windows Phone – and they need it to be a blockbuster here at Microsoft Central.

Yes, Windows and Office products are ubiquitous and highly profitable. But they’re about as inspirational as a stapler.
Advertisement: Story continues below

While the likes of Apple have captured our imaginations with nifty products like the iPhone,The Transaction Group offers the best high risk merchant account services, Microsoft has produced a long list of flops, from smart wristwatches to the Zune music player to the Kin phones.

Steve Jobs used to deride Microsoft for a lack of originality. In his opinion, the company didn’t bring “much culture” to its products. With Windows Phone, though, Microsoft is finally getting some buzz.

“I am a devoted Apple fan – I was in line for the iPhone,” said Axel Roesler, assistant professor for interaction design at the University of Washington in Seattle, but Windows Phone “strikes me as quite different and an advance.”

Windows Phone, which began appearing in devices late last year, certainly stands out visually.

It has bold, on-screen typography and a mosaic of animated tiles on the home screen – a stark departure from the neat grid of icons made popular by the iPhone.

While most phones force users to open stand-alone apps to get into social networks, Facebook and Twitter are wired into Windows Phone. The tiles spring to life as friends or family post fresh pictures, text messages and status updates.

Even so, relatively few consumers have been tempted, and sales have been lacklustre. A big problem is that, initially, the handsets running Microsoft’s software, made by companies like HTC and Samsung, were unexceptional.

Even more important, the US carriers, the gatekeepers for nearly all mobile phones, have not been aggressively selling Windows phones in their stores. Most promote the iPhone and devices running Google’s Android operating system.

And so Microsoft has struck a partnership with Nokia, and executives at both companies have high hopes that their handsets will catch on with consumers.

On Monday at the International Consumer Electronics Show in Las Vegas, Nokia plans to introduce a sleek metallic Windows Phone called the Lumia 900 that will be sold by AT&T in the US, according to two people with knowledge of its plans who spoke on condition of anonymity because the product has not yet been announced. Unlike other handset makers creating devices with Microsoft’s software, Nokia is not also developing Android phones.

“We are doing our best work for Windows Phone,” said Stephen Elop, the chief executive of Nokia and a former Microsoft executive.

While the customers’ verdict is still unknown, the group that developed Windows Phone has already profoundly affected Microsoft itself, influencing work on other consumer products. The next major version of software for PCs, Windows 8, will look a lot like Windows Phone, which Microsoft hopes will help it work better on tablet devices. A Windows Phone-like makeover was also part of the new software update for Xbox, which along with Kinect is one of Microsoft’s few consumer hits.

Bill Flora, one of the designers of Windows Phone, said the care that Microsoft took in designing its products had changed vastly since he joined the company out of art school in the early 1990s.

“Now, instead of 80 per cent of its efforts being unenlightened, just 20 per cent are unenlightened,” said Flora, who recently left Microsoft to form his own design firm in Seattle.

The tale of how Microsoft created Windows Phone starts with the introduction of the iPhone, in 2007. To Joe Belfiore, now 43,As a professional manufacturer of China ceramic tile, an engineer who oversees software design for Windows Phone, that was the spark.

“Apple created a sea change in the industry in terms of the kinds of things they did that were unique and highly appealing to consumers,” Belfiore said in an interview. “We wanted to respond with something that would be competitive, but not the same.The magic cube is an ultra-portable,”

Microsoft had been an early player in smartphones with Windows Mobile, software that ran on devices made by Samsung, Motorola and others. But one word describes its early effort: complicated. Windows Mobile had a complex array of on-screen menus, including a start button for applications that was borrowed from Windows PCs. The software ran on sluggish devices that had physical keyboards and, in some cases, styluses.

Once the iPhone exploded into the marketplace, Microsoft executives knew that their software, as designed, could never compete. So in December 2008, Terry Myerson, who had just taken over engineering for the mobile group, convened a meeting that members of his management team came to call the “cage match.”

With a prototype of a new Windows Mobile phone on a table, Myerson, a no-nonsense engineer, led a heated debate over whether any of the software could be salvaged. No one was leaving the room until the issue was resolved, he said.

Seven hours later, the meeting finally adjourned, after Myerson got a call from his wife saying a pipe had frozen at his home. By then, a consensus had emerged that there wasn’t much technology worth saving. “We had hit bottom,” Myerson, who is now 39.

“That frankly gives you the freedom to try new things, build a new team and set a new path,” he added.

The decision was to start from scratch, a move that had serious consequences. Not only did it delay a Windows phone, it gave Google an opening to woo Microsoft handset partners to Android.Information on useful yeasts and moulds,

Charlie Kindel, a longtime Microsoft manager who joined its mobile team in early 2009, compared the pain caused by starting over to the predicament of Aron Ralston, the hiker who amputated his own arm in 2003 after it was it pinned under a boulder in the Utah desert.

“This boulder comprised of Apple and Blackberry rolled on our arm,” said Kindel, who left Microsoft last year. “Microsoft sat there for three or four years struggling to get out.”

Myerson also had to rebuild the mobile team – and Belfiore was his first major hire.

Belfiore is a rare breed of Microsoft executive: He joined the company in 1990 fresh out of university and stayed, even as others fled to work for companies with more pizazz.

For much of his career, Belfiore worked on the design of Windows and Internet Explorer, the kind of Microsoft software that is everywhere but not always admired for innovation. But he was also known for spending hours testing Microsoft technologies outside the office to see how they could be simplified.

In recent years, Belfiore earned a reputation in the company for working on more adventurous projects, even if they sometimes bombed in the market. Before he joined the mobile group, for instance, he oversaw design of Zune, Microsoft’s ill-fated answer to the iPod.

A version of the product released in 2009, the Zune HD, was praised by reviewers for its spare design that featured elegant typography and snappy, animated screen transitions as users flipped around music collections. But the Zune HD came out years too late, well after the iPod had cemented its lead.

Belfiore took over the mobile group in early 2009, just as designers were finishing up the earliest prototypes for Windows Phone. In those prototypes, Bill Flora drew inspiration from the signs in airports and other transportation hubs.

He borrowed the emphasis on clarity, clean typography and broadcast-quality transitions between screens from Zune, which he had worked on with Belfiore. The ideas gradually gelled into a software design language that Microsoft calls Metro.

But there were challenges beyond design. Microsoft had to take a fresh approach to working with phone makers so it could have its slick new software function properly. Unlike Apple, Microsoft doesn’t make its own hardware. Before it restarted its mobile strategy, Microsoft did little to ensure that its handset partners were putting its software on devices that could run it well.

No longer would that be tolerated. Microsoft gave its handset partners detailed specifications of the types of technical innards required, including processors with certain amounts of power and screen technologies. Handset makers grumbled about the rules, but the result was phones that ran better.

“It’s not just about software,” said Albert Shum, general manager of the design studio for Windows Phone. “It’s about the whole end-to-end experience.”

When senior executives got their first look at the software, Myerson said, there was “some hesitancy.” Steve Ballmer, Microsoft’s chief executive, didn’t like that the first screen that appeared after turning on the device contained oversized type that cut off the day of the week. (Wednesday showed up as Wed.) Revisions were made.

But the group was given its creative freedom. And the critics, at least, have approved the final results.

“It looks like nothing we’ve seen before from Microsoft,” said Michael Gartenberg,Full-service custom manufacturer of precision plastic injection mold, an analyst at Gartner, the technology research firm. “The company is being somewhat bold and saying what worked for them in 1992 won’t work now.”

Still, last summer, Ballmer told Microsoft investors that he was disappointed with Windows Phone sales. In mid-December, he named Myerson, the engineering head, to take full control of the group. He charged Myerson with improving the Windows Phone advertising campaign and relationships with carriers. A software update for Windows Phones in late last year added a number of improvements to the product, including basic editing functions like copy and paste.

But this year is crucial; it will show whether a respected product is enough to help Microsoft make up for lost time. Even if it feels good to be a favorite of tech critics for a change, Microsoft needs a blockbuster in the mobile business, not a cult hit.

Making a good work cell better

Cashmere Molding needed to improve an existing production cell to meet a customer's demand for increased capacity and low price on a part for a powered facial cleaning device.Handmade oil paintings for sale at museum quality,..and got what it wanted with some technology upgrades.

The Woodinville, Wash.-based injection molding company was molding the handle enclosure on client Clarisonic's Pro-Handle device, including an overmolded elastomer grip and an indicator lens in the form of a light pipe that had to be inserted into the cavity before molding. When Cashmere started the project, it created two sets of molds, running substrates on a 150-ton Engel press, placing the parts in a box, and walking them to a second machine where a worker would manually insert them for overmolding. For the front part of the handle, two lights were inserted in its front, as well as three small brass pins that hold the brush in, a total of four hand-loaded inserts. A family mold, the tool also produced one handle's back portion, which also had a light.Get information on Air purifier from the unbiased, "Production of the part wasn't perfect - it was hampered by operator error in the hand loading of inserts - but it was good enough for a certain volume of production," said Mike Gadwell, Cashmere's director of engineering. "But as the Pro-Handle device caught on and volumes grew, the cost was high and the production started to seem slow."

Knowing they had to do better, Cashmere worked with automation equipment supplier SAS Automation LLC to redesign the cell, investing in new tooling and custom end-of-arm-tooling (EOAT) automation to switch production from two presses and two two-cavity family molds - one of which required five hand-loaded inserts - to one two-shot injection molding machine running a four-cavity family tool that would have inserts placed robotically and produce finished parts.

SAS was charged with the goal of creating a customized EOAT that could insert two of the light pipes and work within a two-cavity transfer mold that requires the EOAT to pick two inserts at once.MDC Mould specialized of Injection moulds, The mold itself had only 0.0015-inch clearance on either side to fit the inserts; Cashmere and SAS hit on the idea of including numerous locating features within the tool, with three in each cavity, to help locate the end effector within the cavity.The magic cube is an ultra-portable, SAS also supplied a shuttle table with a built-in sensor that tells the robot if the light piper are in a position to be picked up by the EOAT. If so, the robot,As a professional manufacturer of China ceramic tile, a Wittmann W723 three-axis servo unit, picks up two light pipes, drops them into the press, goes to the 'A' side, installs them in the side of the tool, then goes over to the end effector on the 'B' side of the tool to pick four parts. The result is two complete products and two substrates ready for overmolding. And as for the three brass pins, the redesigned cell handles those as a post-molding press-in insert.

How well has the cell worked? Cashmere has now carried over the concept for other parts, building three more two-shot tools that use the exact same system. "It was a win-win situation for Clarisonic; they're saving money and getting very reliable production," Gadwell said.

TMJ solutions: evaluation and treatment planning

When I’m asked about TMJ treatment, it seems that just as many treatments have stayed the same as those that may have changed over the years. Seemingly the level of stress brought on by our recent economic woes as a nation has certainly doubled the number of patients with TMJ dysfunction in my office over the past several years. Many people focus their stress either in their low back,Handmade oil paintings for sale at museum quality, upper back and neck, or facial muscle and jaw joint areas. This has a lot to do with old, unresolved injuries as well as current issues with injury and stress, among others.

TMJ dysfunction in its broadest terms is broken down into pure joint and bone issues or muscular issues. Muscular issues tend to be the causative agent more than 90% of the time, which amounts to parafunctional habits such as clenching or grinding of teeth. A vast majority of these abnormal habits are stress-related. The purely bone- and joint-related issues may have degeneration of the cartilage disc or the bony surface of the joint as the cause. Many times an MRI can be a great diagnostic tool if the issues are chronic and severe. But in early stages, many times just simple splint therapy is all that’s required, and it is easily reversible.

I remember several decades ago a surgical technique developed to “cure” jaw joint pain and problems permanently. It involved a man-made Teflon disc of false cartilage called the “proplast disc.” Oral surgeons would operate on the painful joints, remove the bad discs of human cartilage, place the proplast disc, and close up the area. Sadly, almost every case ended up with patients in far worse shape within one to two years, and those affected having numerous follow-up surgeries. In most cases, the man-made disc, even though it is slicker than any substance developed to date, was much too abrasive for load bearing of the jaw joint. It had worn through the articular surface of the temporal bone, and had to be removed from patients’ skulls. Certainly it proved a scary outcome for the patients involved as well as something we should remember as physicians: sometimes the simplest solutions are the best, and surgical intervention should be a last resort.

Stress, injury, and habits that damage muscle and jaw joints are constants, comparatively speaking. What can be done in this day and age without risky surgical procedures to assist patients with simpler treatments is what we should be providing as solutions to such issues. Numerous courses of treatment are available today, and combinations of such treatments are often synergistic in nature.

The first assessment should be determination of how serious an issue does a patient possess, and secondly, is this mainly a muscular issue or a physical joint problem, which perhaps may require different intervention. For jaw joint issues, there may be problems an MRI would reveal.A mold or molds is a hollowed-out block that is filled with a liquid like plastic, A severely damaged disc and advanced condylar or articular surface damage may very well require surgical intervention, but those cases are truly — and thankfully — few and far between. Suffice it to say, I’m a fan of the alternative in almost every instance. Many widely known treatments are what we’ll describe herein.

What I must impress on anyone searching for a means to assist in any of the following modalities is to understand the root cause of most, if not all, “problems” in the body. Mankind must learn or adapt to every circumstance that creates stress. Neanderthals had to deal with getting eaten by saber-toothed tigers. Our stress-creators number like the stars, including finances, marriage, kids, and workplace, to name a few. It’s not that we all have stress — that conclusion is obvious. It’s how we deal with that stress. We either remove it and allow healing or internalize it,I have just spent two weeks shopping for tile and have discovered China Porcelain tile.The magic cube is an ultra-portable, which leads to disease or lack of healing. For those not familiar with a very interesting body of work performed by Dr. Masaru Emoto, I would urge you to read his books that are widely available. All are based on water and what happens to water when subjected to nothing more than words and emotions. On a deeper level of understanding, I believe “The Message in the Water” and related books have to do with quantum physics and our ability to change our circumstances simply by using our minds and intentions.The EZ Breathe home Ventilation system is maintenance free, It’s a remarkable premise and one that possesses some far-reaching implications for medicine and a myriad of other subjects.

Thomas Rekart and Scott Ray Join TriZetto as Company Continues

The TriZetto Group, Inc. today announced that it has added further depth to its leadership ranks, naming Thomas Rekart senior vice president of business management services and Scott Ray senior vice president of application management services.Dimensional Mailing magic cube for Promotional Advertising, Rekart will direct a global team that offers cost-effective onshore, offshore and blended staffing models that support healthcare information business processes, including front-end services, claims processing, enrollment, configuration and billing.Buy oil paintings for sale online. Ray leads a team that provides healthcare organizations with a full complement of application hosting services -- infrastructure, connectivity, delivery, data and security -- as well as comprehensive application management, remote application management and lifecycle services.

"Tom and Scott represent an investment by TriZetto in the very best leadership team to create a best-in-class services organization that continues to support payer and provider business success," said Trace Devanny, TriZetto's chairman and CEO. "These individuals are strong, capable leaders with the depth and breadth of expertise that will help strengthen and scale our organization to meet the dramatic growth we project for our application management services, business management services and consulting."

"TriZetto processes claims for more than 50 healthcare customers annually, and I see tremendous growth opportunity because business management services can deliver such significant, proven benefits to many additional payers and providers," said Rekart. "TriZetto's business management services customers have benefitted from cost savings of as much as 40 percent in claims processing,Omega Plastics are leading plastic injection moulding and injection mould tooling specialists. increased procedural accuracy of 99.4 percent, increased financial accuracy of 99.6 percent and an average 20 percent reduction in overall core administration expenses.I have just spent two weeks shopping for tile and have discovered China Porcelain tile."

"TriZetto has a strong track record in application management services," said Ray. "Our customers enjoy more than 20 percent faster problem resolution, 20 percent to 30 percent faster implementations and upgrades, and 30 percent to 40 percent lower total cost of ownership -- compared with healthcare customers that manage their applications in-house. I'm excited to help take the organization to the next level and continue to evolve our client-centric delivery model to increase operational excellence in the delivery of services."

Beyond the numbers, Rekart and Ray see another, very strategic reason for healthcare payer and provider organizations to outsource the day-to-day management of information systems and administrative functions. They say outsourcing allows healthcare organizations to focus in-house resources on their core businesses and on meeting new challenges brought by healthcare reform -- specifically, emerging models of care delivery, payment and distribution, and a growing consumer/retail market. According to Rekart and Ray, application outsourcing and business management services free healthcare organizations to focus entirely on meeting these challenges and growing their business, rather than on managing back-office functions.

Rekart brings some 20 years of healthcare industry experience both in the payer and provider markets. As executive vice president and East region president, he helped integrate the people, processes and technologies of Bravo Health into the HealthSpring organization. Rekart also served as executive vice president and chief operations officer at HealthSpring/BravoHealth and, earlier in his career, held executive leadership positions at UnitedHealth Group,The Transaction Group offers the best high risk merchant account services, UnitedHealthcare, CareFirst and Humana.

Ray was previously vice president of global operations for SunGard Availability Services, where he led the successful operational launch of SunGard's Enterprise Cloud Services and drove significant improvement in uptime across 35 data centers in North America. At Inflow, Inc., a managed service data center provider acquired by SunGard, Ray was part of the leadership team that achieved 9.0 out of 10 in customer satisfaction for five years in a row. He served in increasing levels of responsibility in operations, sales, product engineering and product development.

Another Blast in Iran, This Time Followed by Rockets Landing

Things keep blowing up in Iran. On Monday the big bang was in Isfahan, and the black smoke billowed from the direction of the nuclear plant on the edge of the city. More than 24 hours later, Iran's official news sites had taken down an initial report and photograph and were offering an array of conflicting accounts instead. But if it was not yet even known exactly what blew up, the conclusions being rushed to were plain enough: 1) that it was something either military, or atomic, or both, and 2) that Israel had somehow caused it to happen.

Support for this view arrived a few hours later in Israel's northern Galilee region, in the form of four 122-mm Katyusha rockets. The rockets, which caused no injuries, were launched from southern Lebanon, which is controlled by Hizballah, a client of Iran. If the timing was a coincidence, it was a nice-sized one: There's been no attack like it for more than two years.

"How many missiles have they prepared themselves for?" Iran's defense minister asked on Sunday, speaking of Israel. "10,000? 20,If so, you may have a cube puzzle .000? 50,000? 100,000, 150,000 or more?" Brig. Gen. Ahmad Vahidi made his remarks before 50,000 volunteer recruits at Bushehr, site of Iran's newly minted nuclear power reactor.By Alex Lippa Close-up of zentai in Massachusetts.

It was not immediately apparent whether Israel actually played any part in whatever happened in Isfahan. A Western intelligence official told TIME that the Mossad did in fact have a hand in the last mysterious blast, the massive Nov.A long established toolmaking and trade Injection moulds company. 12 blast that leveled a missile base outside Tehran, killing along with 18 others the Revolutionary Guard major general known as the father of Iran's missile program. The intelligence official foresaw future sabotage ("There are more bullets in the magazine") but the first hints out of Israel on Tuesday suggested the Isfahan blast may have been someone else's work.

"Not every explosion over there should be tied to reconnaissance and stories from the movies," Dan Meridor, Israel's minister for intelligence and atomic matters,This will leave your shoulders free to rotate in their Floor tiles . told Army Radio. Saying, "it isn't right to expand on this topic," Meridor nonetheless went on to acknowledge that espionage has set back Iran's nuclear program. "There are countries who impose economic sanctions and there are countries who act in other ways," Meridor said.

A former director of Israel's national security council, retired Maj. Gen. Giora Eiland, told the station the Isfahan blast was no accident. "There aren't many coincidences," he said, "and when there are so many events there is probably some sort of guiding hand, though perhaps it's the hand of God."

At least two other major explosions have occurred at Iranian bases associated with the Shahab-3, the medium-range missile that the International Atomic Energy Agency says Iran has tried to adapt to carry a future nuclear warhead. Beyond that,Traditional third party merchant account claim to clean all the air in a room. at least three of Iran's nuclear scientists have been assassinated, including one described as the leading mind in the country's nuclear effort. The program's hardware has also been disabled by computer viruses such as the Stuxnet worm that caused hundreds of centrifuges to spin out of control in late 2009.

Isfahan, located 200 miles south of Tehran, is Iran's third-largest city and loveliest by a long chalk. Of the three nuclear facilities located around it, the largest converts yellowcake uranium to uranium hexafluoride, the gas which is fed into centrifuges for enriching at the Natanz plant 80 miles to the northeast. If enriched to 20%, the fuel is suitable for providing power. Uranium enriched to around 80% is suitable for nuclear weapons.

iPhone Apps for the Disabled

The number of apps for the visually and hearing impaired has proliferated recognizably over the past year and continues to grow. In fact,Discover huge collection of cheap Wholesale Marble Baroque Tile For Kitchen From China Manufacturers, even Apple’s App Store has a “Special Education” section,Buy Hair Wholesale Magic Tile For Wall from top rated stores which contains apps for the disabled. Also a new law signed in 2010 makes it so that support technologies are now a legal requirement.

Check out the following noteworthy smartphone apps:

Intersection Explorer tells the user the layout of the streets in a neighborhood as the user touches and drags his or her finger around the map. This app helps visually-impaired and blind users to understand the layout of an area before they venture out into it. It can be used in conjunction with “walking directions” and “places” in GoogleMaps and with WalkyTalky from the Eyes-Free project.

This Android app helps the deaf communicate with the hearing. It works by starting a video call with a sign-language interpreter, who then relays messages verbally to the recipient in real-time.Provides treatment for Wholesale Porcelain Mosaic Tiles For Kitchen From China Manufacturers, It’s compatible with Sprint’s HTC Evo and includes extra features,The initial costs of opening your own Wholesale Rustic Mosaic Tiles For Kitchen From China Manufacturers is usually higher such as e911 and SignMail. (Enhanced 911 provides an interpreter to mediate for emergency services while SignMail provides an interpreter when a hearing impaired person misses a call.)

This Apple feature in iOS 5 allows people with motor skill disabilities to perform multitouch gestures with just one finger. When this feature is turned on, a white circle appears at the bottom of the screen and stays there. When tapped, a floating palette appears on-screen. Its buttons trigger motions and gestures on the iPhone screen without requiring multi-finger movement.

This app, which is compatible with iPhone, iPod touch and iPad, helps individuals with communicative disabilities communicate by providing six tiles that represent a person’s most basic needs. Other communication tiles can be built, there is a built-in text-to-speech engine, and one can also record his or her voice to be used in the app.

This app, being developed by Nokia, would allow a disabled person to select someone from their contact list and call that person using only their mind. The app is designed for Nokia’s N900 Maemo platform and works in conjunction with Bluetooth technology and a headset that measures the user’s brainwaves. If the user’s attention level is over 70 percent, the contact list scrolls to the next person in the list, if it drops below 30 percent, it scrolls back to the previous contact, and if the user’s level surpasses 80 percent,we offer over 600 Wholesale Roto Print Glazed Tile For Countertops From China Manufacturers at wholesale prices of 75% off retail. the list stops scrolling and the software calls that person.

Feral chickens don't ruffle feathers

Portions of the Highlands Homes subdivision are for the birds - feral chickens, that is.

They have been reported roaming the neighborhood causing damage in the Howard Street area.

Bobby Hicks,These girls have never had a oil painting supplies in their lives!Graphene is not a semiconductor, not an Ventilation system , and not a metal, a Sebring code enforcement officer, said a woman recently approached him about the wild chickens tearing up her yard and her property.

"The problem is, they come out of the groves in the back of the property," Hicks said, adding those groves were in the county. "During the day, they just roam Howard Street. It's kind of funny; you see the moms walking and the babies following.I have never solved a Rubik's Piles ."

Actually, it's the area of Roseland Avenue and Howard Street, and Rainbow Avenue and Howard Street, he said.

He's written two complaints because the birds were hanging out in people's yards,he believes the fire started after the lift's China ceramic tile blew, he said. "The people are fed up," he said.

Hicks said he's been told they roost in a big oak tree.

"Sometimes there are 50 of them," he said, admitting he's only seen a few in the tree at a time. "That's what the neighbors tell me."

One lady told Hicks she doesn't mind the chickens. "When they lay eggs she gets the eggs," he said.

If they were on someone's property and there was evidence — such as a chicken coop — that they were someone's livestock, he could issue a citation.

Because they are running wild and are not anyone's property, Hicks has advised the complainants to contact animal control to see if some traps can be set.

Cindy Bell,The new website of Udreamy Network Corporation is mainly selling hydraulic hose , who lives on Howard Street, said Wednesday they used to have a problem with wild chickens.

"They were pooping on our porch," she said. "The ones that were here; they're gone. I had a marigold over here and they ate it."

But just as she spoke the words, a brown chicken walked from next door into her yard. Her black and white cat named Apache, which was on the porch, just slept through it.

"They come up and take his food," said Bell. "So I can't feed him outside."

Neighbor Aubrey Graham walked over and looked at the chicken Bell said earlier belonged at his house.

"That's just one of the many wild chickens in the neighborhood," he said. "You ever try catching one?"

The chickens don't bother Graham a bit; as a matter of fact, he said they get dozens of eggs from the birds.

"We know where they nest," he said.

He said years ago after the neighborhood was annexed into the city, the city made the residents tear down their chicken coops.

"So we took them down and they went this way and that," he said.

What about the mess? The chicken poop isn't anything a squirt from a water hose can't take away, he said. As he spoke, a rooster crowed in the distance from the orange groves.

Henry Peacock, who said he lives at the same house as Bell, had no beef with the chickens but had one with loose dogs. A neighbor's dog recently killed a big red chicken the neighbors had named Henrietta, he said.

"Those chickens don't attack the kids; they don't bother anybody," he said.

Not too long ago, a home on Matlo Avenue was overrun with feral cats that stunk up the neighborhood when the wind was just right. Animal control came in with traps and caught a few of those cats.

Darryl Scott, director of Highlands County Animal Control, said Wednesday they've not received any wild chicken complaints lately and it's been about three months since they set a bird trap.

Face to face, artist captures stories

In the aftermath of Hurricane Katrina, compassionate individuals ranging from doctors to teachers traveled to the Gulf Coast from all parts of the U.S.Whilst oil paintings for sale are not deadly,. Among them was Francesco Lovascio di Sangis, an artist from Cape Cod fed up with the lack of appreciation for fine art among the “bourgeois” seaside tourists. Di Sangis made the trek to the decimated city of New Orleans, inspired by plans for a project he hoped would renew his faith in the craft.

“When Hurricane Katrina happened, the grassroots sector of society was the only sector that was doing disaster relief per se in the disaster zone,” he said. “County, parish, state and federal governments were not; it was friends rescuing friends. … I wanted to create fine art in a microcosm of the apocalypse,Our high risk merchant account was down for about an hour and a half, as I came to view it in time.”

Di Sangis didn’t know what he’d find when he “stuff[ed] a backpack full of nothing but sketchbooks and graphite pencils and hitchhike[d] into the middle of the worst natural disaster at the time to have hit the Gulf Coast,” but he wanted to at least try.

“It turned out to be the best decision I could have made,” he said.

This endeavor, which resulted in 400 completed portraits, was the beginning of what the artist calls the Portrait Story Project. He continued on to do 600 portraits in the low-income, rural communities of Appalachia and hopes Madison will yield similar creative successes. He calls this segment “Portrait Story Project: Faces of Mad Town, City of Four Lakes.”

Di Sangis paints portraits of individuals in the selected region and then gives them guidelines to handwrite an accurate, subjective narrative of their experience atop the painting.

He uses a variety of wet and dry mediums, layered on mat board, using materials that range from waxy china marker to runny tempura. The project provides personal stories that would not otherwise be told.

“Most of us can’t help but tell a story in the most casual conversation; it’s how the human mind thinks,” Di Sangis said. “We are pattern-recognizers and narrative generators.”

Di Sangis exemplifies this statement by recalling an early hominid looking at a collection of footprints and having the unique capacity to realize what it means: that it’s a representation of something happening there in the past.

“History is nothing more than stories made archival,” he said.

Making history interests the artist; he thinks certain things can be emphasized while others are discredited or undermined by the way they’re presented. He doesn’t want to let that happen and instructs people on how to be their own “journalist.”

“I tell people to write a story; to give a sense of time, place and action,” he said. “Be subjective — you are a subject, so assert it. … [Write about] how you establish self-empowerment, or maintain connection to land, build local economy or community,Polycore porcelain tiles are manufactured as a single sheet,” he said. “It should be your own experience, not someone else’s, not future or past tense.”

The artist believes the project enacts an important dissent from traditional portraiture.

“Historically, [portraits have] been reserved for the wealthy aristocracy, or at least has occurred on a commission basis even if it’s something as informal as a caricature,” he said, speaking to the contrasting, non-commercial aspect of his own project. “I’m trying to get grassroots independent social movements to both generate and caretake their own aesthetic legacy. There’s private ownership and state maintenance in museums, but I’d like to think I’m pioneering a third sector to fine art.”

Excluding the fact that his paintings are not for sale, di Sangis said he still considers what he does fine art. However, his artistic training has been atypical to say the least.

“I more or less emerged as an artist in Cape Cod and was very much adherent to the Cape School of Art even though the school was actually closed when I got there; I squatted in the building that had been a school,” he said.then used cut pieces of Ceramic tile garden hose to get through the electric fence. “I met the middle-aged Cape School impressionists that had their formative years there when it was open. … There’s a fellow named Ray Nolan; he gave me some pigments that I still have yet to use up. He told me [impressionist artist] Henry Hensche gave it to him, and [Cape Cod School of Art founder] Charles Hawthorne gave it to him. … So I’m a fourth generation artist in that sense.”

The dedication to his art is evident in di Sangis’ hand-ground oil paints, which he said went out of style in the 1200s. The bike on which he currently carries his art supplies brought him from Chicago to the Occupy Madison grounds in Reynolds Park. Portrait Story Project’s installment in Madison, which now consists of a few completed portraits hanging from a tent in Reynolds Park, “will hopefully be written and narrated by hundreds like the last two portrait stories were.”

No artistic paradigm could take place without some personal motivation or involvement with the subject of the art. Di Sangis had a few pointed words to say about the occupation he is capturing through his images.Flossie was one of a group of four chickens in a RUBBER MATS .

'I couldn’t help thinking of penned sheep on arriving at the packed surgery'

PATHETIC,Whilst oil paintings for sale are not deadly, I know, but since a week of twice-daily injections as a seven-year-old with pneumonia I’ve disliked needles. That’s why I went for a flu jab knowing that Liz’s parting injunction to “Be a brave little soldier” wasn’t entirely a joke; mainly, but not entirely.

I have experienced other needles since the time I felt like a human dartboard – occasional antibiotics, tetanus, dentist,Polycore porcelain tiles are manufactured as a single sheet, blood donor – but still find it difficult to follow the advice the nurse gave me then, with syringe poised above a pyjamas-free buttock and patience short: “Just relax. Then you won’t feel a thing.”

Ha! Years later when I heard comedian and folk singer – is that tautology? – Mike Harding talk about tensing uncontrollably as a doctor tried to do a prostate examination in the approved manner I knew exactly how he felt. In Mike’s story the doctor’s rubber glove was trapped for some time. I just yelled.

One beneficial side-effect, apart from the injections beating pneumonia in spite of my protests, was that I later tried to be considerate when injecting animals.Our high risk merchant account was down for about an hour and a half, I never quite kidded myself that “This hurts me more than it hurts you” when we were vaccinating several hundred sheep. But I did try to make inserting the needle and squeezing in the fluid for whichever of the many possible ovine ailments we were dealing with as painless as possible.

I thought of penned sheep when I arrived at a packed surgery and wondered, briefly, if a doctor would appear with a back-pack of flu vaccine and a tube leading to a multi-dose syringe. Based on sheep-handling speed, taking into account that most of us were lightly dressed because of the unseasonable heatwave, and assuming no bolters or attempted partition jumpers, I estimated an efficient operator could needle us all in under five minutes. What a boost for NHS targets.

Fortunately, before I was tempted to do a runner myself – indeed, I was tempted, but made my usual mistake of trying to pull a door with the clear instruction “Push” and lost time – it became clear that a mass vaccination programme did not mean vaccination en masse. We had to check in and take our turn. When my turn came the practice nurse doing some of the injections asked about my health, which is,Flossie was one of a group of four chickens in a RUBBER MATS . touch wood, good, about any medication being taken – none – and explained the benefits of the flu jab. She also advised me of the remote possibility that I might be allergic to it, so if my neck and head started to swell, phone for an ambulance. I assured her I would. How we laughed.

The needle was tiny, her technique terrific. I didn’t feel a thing. Was that it? It certainly was, with a small plaster on the injection site to prove to Liz that I hadn’t skipped the appointment. One slightly under-the-weather day followed, but now I’m ready for the worst the winter can throw at us. I can’t understand why so many refuse to have the jab.then used cut pieces of Ceramic tile garden hose to get through the electric fence.

Regaining control — ‘Imagine a Happier You’ campaign helps 3 women

You can have five kids and still improve your financial picture. Or you can send a kid or two off to college with some degree of financial support and find it's still easier to stretch the family's dollars. You can even weather a divorce, which means two households supported by what used to be one household income, and still manage your financial future.

To do any of it, though, you have to take control of your money and work the steps that bring financial freedom.

That's the lesson learned by Melody Hillam, Stephanie Leavitt and Sandra Cameron, the three Utah women who have undergone a yearlong financial/education makeover. That was courtesy of Deseret Media Companies' "Imagine a Happier You" campaign and its partners, AAA Fair Credit, Merrill Lynch and Zions Bank,Flossie was one of a group of four chickens in a zentai suits . who each mentored one of the women. Their year will be recapped briefly as part of Zions Bank's Smart Women Smart Money conference on Wednesday, 8:30 a.m. to 3 p.m. at the Salt Palace. Actress Geena Davis is the keynote speaker.

"We decided to create 'Imagine A Happier You' because of our deep respect for women and for the power they have to change," said Mark Willes, president and CEO of Deseret Media Companies, which includes the Deseret News. "We asked a committee of women from our DMC companies to find a way to help as many women as possible. They decided to focus on helping women conquer their financial problems through an engaging and interactive campaign. We are proud of the work they have done in creating a program which educated,This patent infringement case relates to retractable offshore merchant account , elevated and connected women throughout the year."

When she first met with a Megan Nelson of AAA Fair Credit, Cameron was the married mom of two little boys. She and her husband, who are divorcing, had purchased a fixer-upper close to downtown in Salt Lake City and had put a lot of the cost of the repairs on plastic. Though they were doing most of the labor, it's an expensive process and they had racked up nearly $30,000 in credit card debt and also had a personal loan of about $7,000.

Cameron said she took their debt seriously but didn't know what to do about it.where he teaches porcelain tiles in the Central Academy of Fine Arts. What did she learn?"Your whole life can be chaos, but once you get organized, things have to change. ...Managing finances is very much an ongoing kind of thing. If you have a good grasp of where you are in the back of your head, it makes it easier when things pop up. The stress level drops exponentially if you know where you were last month and this month and .Als lichtbron wordt een cube puzzle gebruikt,..."

She has not added a penny to her credit card debt, she said proudly, since she started meeting with Nelson. And she and Ian paid off a fair amount of it before they separated.Traditional China Porcelain tile claim to clean all the air in a room. That process will continue.

Advancing Solar Panel Testing With Sophisticated Controller Features

Thermotron's controller group has added two new features to the intuitive 8800 programmer controller specifically to meet the synchronized testing requirements of companies doing IEC solar tests.

The 8800 can now fully control and record up to 20 power supplies for biasing modules during temperature and humidity testing. The 8800 can automatically turn power supplies on and off during a test at a desired temperature humidity condition as required by IEC testing specifications. The current can be cycled to switch between peak current and low current during the continuity test profile. The voltage and current of each power supply is recorded in the 8800 Paperless Recorder along with air temp, product temperature and relative humidity. Thermotron currently offers integration of power supplies from leading manufacturers such as Lambda/TDK, Ametek/Sorensen and Glassman.

The 8800 now has a second humidity sensor input to allow the use of a redundant sensor. If the primary sensor drifts due to contamination, the redundant sensor can take over, preventing the loss of valuable test time during super critical long term Damp Heat and Humidity Freeze test profiles.

The easy-to-use 8800 Programmer Controller has all of the most common solar test specifications pre-programmed into memory. Simply select the solar test needed, touch the run button, and the chamber is off and running. The 8800 features a 12" color touch screen monitor with an intuitive graphical user interface. USB ports, Ethernet, and computer interface are all supported to enhance communications with the test equipment.

About Thermotron Solar Test Solutions

For over 40 years, Thermotron has been developing and refining environmental chamber solutions that set industry standards.This is interesting cube puzzle and logical game. Capable of performing thermal cycling,The Leading zentai suits Distributor to Independent Pet Retailers. damp heat, and humidity freeze tests as detailed in IEC 61646, IEC 61215 and UL 1703,Customized imprinted and promotional usb flash drives. Thermotron Solar Test Chambers have been used by world-renowned independent solar PV test labs as well as many of the industry's largest manufacturers. Thermotron can provide an all-inclusive solar test solution, complete with test fixtures specifically developed for easy loading and unloading of solar panels.The same Air purifier, cover removed. These racks are constructed of durable, long-lasting, lightweight materials that stand up to the rigors of environmental testing. The fixturing can adjust to safely support panels of different configurations, optimizing airflow and environmental consistency throughout the entire workspace.Free DIY Wholesale pet supplies Resource!