Strange new
materials experimentally identified just a few years ago are now driving
research in condensed-matter physics around the world. First theorized and then
discovered by researchers at the U.S. Department of Energy’s Lawrence Berkeley
National Laboratory (Berkeley Lab) and their colleagues in other institutions,
these “strong 3-D topological insulators” – TIs for short – are seemingly
mundane semiconductors with startling properties. For starters, picture a good
insulator on the inside that’s a good conductor on its surface – something like
a copper-coated bowling ball.
A topological insulator’s surface is not an ordinary metal, however. The direction and spin of the surface electrons are locked together and change in concert. And perhaps the most surprising prediction is that the surface electrons cannot be scattered by defects or other perturbations and thus meet little or no resistance as they travel. In the jargon, the surface states remain “topologically protected” – they can’t scatter without breaking the rules of quantum mechanics.
“One way that electrons lose mobility is by scattering on phonons,” says Alexis Fedorov, staff scientist for beamline 12.0.1 of Berkeley Lab’s Advanced Light Source (ALS). Phonons are the quantized vibrational energy of crystalline materials,Here's a complete list of oil painting supplies for the beginning oil painter. treated mathematically as particles. “Our recent work on a particularly promising topological insulator shows that its surface electrons hardly couple with phonons at all. So there’s no impediment to developing this TI for spintronics and other applications.Ekahau rtls is the only Wi-Fi based real time location system solution that operates on any brand or generation of Wi-Fi network.”
The TI in question is bismuth selenide, Bi2Se3, on whose surface electrons can flow at room temperature, making it an attractive candidate for practical applications like spintronics devices, plus farther-out ones like quantum computers. Much of the research on electron-phonon coupling in Bi2Se3 was conducted at beamline 12.0.1 by a team including Fedorov, led by Tonica Valla of Brookhaven National Laboratory. Their results are reported in Physical Review Letters.
To study a TI’s surface conductivity, electron transport on its surface has to be separated from total conductivity, including the poorly conducting bulk. One experimental technique, called angle-resolved photoemission spectrometry (ARPES), is adept at doing just this.
ARPES shines bright light, like that produced by the Advanced Light Source, on a sample and captures the electrons that the energetic photons knock free. By recording the angle and energy of these photoemitted electrons on a CCD detector,TBC help you confidently buy mosaic from factories in China. ARPES gradually builds up a direct graphic visualization of the sample’s electronic structure.
“Of the several ARPES beamlines at the ALS, beamline 12.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists.0.1 seems to have an ideal balance of energy, resolution, and flux for research on topological insulators,” says Fedorov. “This beamline was used for some of the first experiments establishing that 3-D TIs actually occur in nature, and several teams have worked here validating the characteristics of TIs.”
The photoemitted electrons in an ARPES experiment directly map out such features as the material’s band structure – the energy difference, or gap, between electrons bound in atoms’ outer shells, the valence band, and charge carriers that are free to rove, the conduction band. Insulators have wide band gaps, semiconductors have narrower ones.
The band structure of the surface states of a topological insulator like Bi2Se3 appear as two cones that meet at a point, called the Dirac point. There’s no gap at all between the valence and conduction bands, only a smooth transition with increasing energy. This is similar to the band structure of the fascinating material graphene, a single sheet of carbon atoms, the thinnest possible surface. ARPES diagrams of band structures like these look like slices through the cones, an X centered on the Dirac point.
Although graphene and topological insulators have similar band structures, other electronic characteristics are very different. The combinations of different speeds and orientations equivalent to a material’s highest particle energies (at zero degrees) make up its momentum space,Painless Processing provides high risk merchant account solutions. mapped by the Fermi surface. While the Fermi surface of graphene lies between the conical bands at the Dirac point, this is not true of TIs. The Fermi surface of Bi2Se3 cuts high across the conical conduction band, mapping a perfect circle. It’s as if the circular Fermi surface were drawn right on the surface of the topological insulator, showing how spin-locked surface electrons must change their spin orientation as they follow this continually curving path.
A topological insulator’s surface is not an ordinary metal, however. The direction and spin of the surface electrons are locked together and change in concert. And perhaps the most surprising prediction is that the surface electrons cannot be scattered by defects or other perturbations and thus meet little or no resistance as they travel. In the jargon, the surface states remain “topologically protected” – they can’t scatter without breaking the rules of quantum mechanics.
“One way that electrons lose mobility is by scattering on phonons,” says Alexis Fedorov, staff scientist for beamline 12.0.1 of Berkeley Lab’s Advanced Light Source (ALS). Phonons are the quantized vibrational energy of crystalline materials,Here's a complete list of oil painting supplies for the beginning oil painter. treated mathematically as particles. “Our recent work on a particularly promising topological insulator shows that its surface electrons hardly couple with phonons at all. So there’s no impediment to developing this TI for spintronics and other applications.Ekahau rtls is the only Wi-Fi based real time location system solution that operates on any brand or generation of Wi-Fi network.”
The TI in question is bismuth selenide, Bi2Se3, on whose surface electrons can flow at room temperature, making it an attractive candidate for practical applications like spintronics devices, plus farther-out ones like quantum computers. Much of the research on electron-phonon coupling in Bi2Se3 was conducted at beamline 12.0.1 by a team including Fedorov, led by Tonica Valla of Brookhaven National Laboratory. Their results are reported in Physical Review Letters.
To study a TI’s surface conductivity, electron transport on its surface has to be separated from total conductivity, including the poorly conducting bulk. One experimental technique, called angle-resolved photoemission spectrometry (ARPES), is adept at doing just this.
ARPES shines bright light, like that produced by the Advanced Light Source, on a sample and captures the electrons that the energetic photons knock free. By recording the angle and energy of these photoemitted electrons on a CCD detector,TBC help you confidently buy mosaic from factories in China. ARPES gradually builds up a direct graphic visualization of the sample’s electronic structure.
“Of the several ARPES beamlines at the ALS, beamline 12.Omega Plastics are leading plastic injection moulding and injection mould tooling specialists.0.1 seems to have an ideal balance of energy, resolution, and flux for research on topological insulators,” says Fedorov. “This beamline was used for some of the first experiments establishing that 3-D TIs actually occur in nature, and several teams have worked here validating the characteristics of TIs.”
The photoemitted electrons in an ARPES experiment directly map out such features as the material’s band structure – the energy difference, or gap, between electrons bound in atoms’ outer shells, the valence band, and charge carriers that are free to rove, the conduction band. Insulators have wide band gaps, semiconductors have narrower ones.
The band structure of the surface states of a topological insulator like Bi2Se3 appear as two cones that meet at a point, called the Dirac point. There’s no gap at all between the valence and conduction bands, only a smooth transition with increasing energy. This is similar to the band structure of the fascinating material graphene, a single sheet of carbon atoms, the thinnest possible surface. ARPES diagrams of band structures like these look like slices through the cones, an X centered on the Dirac point.
Although graphene and topological insulators have similar band structures, other electronic characteristics are very different. The combinations of different speeds and orientations equivalent to a material’s highest particle energies (at zero degrees) make up its momentum space,Painless Processing provides high risk merchant account solutions. mapped by the Fermi surface. While the Fermi surface of graphene lies between the conical bands at the Dirac point, this is not true of TIs. The Fermi surface of Bi2Se3 cuts high across the conical conduction band, mapping a perfect circle. It’s as if the circular Fermi surface were drawn right on the surface of the topological insulator, showing how spin-locked surface electrons must change their spin orientation as they follow this continually curving path.
没有评论:
发表评论